Member Profile
Membership type: full
Monsurat Omolola Jimoh
Country of origin: Nigeria Currently in: Nigeria, Ede General field of specialization: Engineering sciences- Academic Background
-
Degrees
2021 Doctorate Engineering sciences2015 Master Engineering sciences2008 Undergraduate Engineering sciences - Research and Profession
-
Current Research Activities
Engineering sciences
1. Material development especially wastes valourization with application in energy and environment. 2. Drilling fluid development using non-synthetic additives 3. Green corrosion inhibitor development and synthesis
Publications resulting from Research:
M.O. Jimoh, T.O. Salawudeen, A.O. Arinkoola and M.O. Daramola (2020). Rheological study of a new water-based drilling fluid using Ubakala clay in the presence of natural polymers. Chemical Engineering Communications, https://www.tandfonline.com/loi/gcec20
M. O. Jimoh, A. O. Arinkoola, T. O. Salawudeen, M. O. Daramola (2020). Rheological Evaluation of Composite Natural Polymers as Rheology Control Additive in Water-Based Drilling Fluid. Petroleum and Coal, 62(1) 129-141.
Jimoh, M. O., Salawudeen, T. O., Arinkoola, A. O, Daramola, M.O. (2019) Performance Evaluation Of Abia Clay With Natural Polymers In Water-Based Drilling Fluid Development, IOP Conf. Ser. : Journal of Physics: 1378, 022117 doi:10.1088/1742-6596/1378/2/022017
E.O. Dada, I.A. Ojo, A.O. Alade, T.J. Afolabi, M.O. Jimoh, M.O. Dauda (2020). Biosorption of Bromo-based dyes from waste water using low cost adsorbent: A review. Journal of Scientific Research & Reports, 26(8): 34-56, 2020
Salawudeen T.O., Arinkoola A. O., Alade A.O., Salam K.K., Olufayo O.A., Jimoh M.O. and Dada E.O. (2020). Performance Characteristics of Agbabu natural Bitumen ternary nano composite with polypropylene and multiwall carbon Nanotubes. Songklanakarin Journal of Science and Technology, 42(6): 1-8
Arinkoola A.O., Salam, K.K., Salawudeen, A.O., Abidemi, G.O., Hammed, J.O., Jimoh, M.O., Olufayo, O.A. and Adelaitan, Y.M. (2020). Improvement of filtration properties of Nigerian Bentonite clay using locally sourced biomaterials. LAUTECH Journal of Civil and Environmental Studies, 5:114-130.
Salawudeen T. O., Arinkoola A. O., Jimoh M. O., Salam K. K. and Ogunmola E. O. (2016). Effect of inert fibre on the performance of B. eurycoma as rheology and filtration control additive in water-based drilling fluid. InternationalJournal of Petroleum Engineering,2(3):191-208. www.inderscience.com
Salawudeen, T. Olalekan, Alade A. Olarenwaju, Arinkoola A. Olatunde and Jimoh M. Omolola (2016). Potential application of oyster shell as adsorbent in vegetable oil refining. Advances in Research, 6(6):1-8. www.sciencedomain.org
Afolabi, Tinuade J., Alade, Abass O., Jimoh Monsurat O., and Fashola I.O. (2015). Heavy metal ions adsorption from diary industrial wastewater using activated carbon from milk bush kernel shell. Desalination and Water Treatment, 1-13. http://www.tandfonline.com/loi/tdwt20
A. O. Arinkoola, K.K. Salam, S. O. Alagbe, A. S. Afolayan, T. O. Salawudeen, M. O. Jimoh, I. U. Duru, O. J. Hammed and T. A. Adeosun (2021). Influence of Metakaolin and nano-clay on compressive strength and thickening time of class G oil well cement. Songklanakarin J. Sci. Technol. 43 (1), 118-126.
Current profession
Current professional activities type:ResearchDevelopment of water-based drilling fluid using locally sourced non-synthetic additives. Other research activities include waste valourisation and application in various processes such as energy and environmental managements. Development of environment-friendly and cost-effective green processes. Polymeric modification of indigenous bitumen in the presence of nano-addiives for improved road service life in Nigeria.
Workshop and Conference Attended
2020 Department of Mechanical and Manufacturing, Universiti Putra, Malaysia. ONLINE Improving Academic Writing Skills in Publishing High Impact Journal, Department of Mechanical and Manufacturing, Universiti Putra, Malaysia.2019 Department of Mechanical Engineering, College of Engineering, Covenant University, Ota, Nigeria, July 3- 8, International Conference on Engineering for a Sustainable World (ICESW)2018 University of Illinois, Champaign-Urbana, Illinois, USA, June 11- 14 55th Annual Conference of The Clay Mineral Society (CMS)2017 Federal University of Technology, Akure, (FUTA) Nigeria April 2 – 4 Humboldt Kolleg International Conference2016 Faculty of Science, Federal University Oye-Ekiti (FUOYE), Nigeria June 21-22 International Science Conference2016 Faculty of Engineering, Ladoke Akintola University of Technology (LAUTECH), Ogbomoso, March 22-24 4th International Conference on Engineering and Technological Research2013 Faculty of Engineering, Ladoke Akintola University of Technology (LAUTECH), Ogbomoso, March 26 -28 2nd International Conference on Engineering and Technological Research2013 NSE Secretariat, Ibadan A-3 Day Mandatory Continuing Professional Education Course for Prospective Corporate Member of the Nigerian Society of EngineersAffiliations
Association of Professional Women Engineers (APWEN)Council for the Regulation of Engineering in Nigeria (COREN)The Clay Mineral SocietyInternational Association of Engineers (IAENG)Society for Petroleum Engineers (SPE)Presentation given
2018Performance Evaluation Of Abia Clay With Natural Polymers In Water-Based Drilling Fluid DevelopmentConvenant University OtaEvent: International Conference on Engineering for a Sustainable World (ICESW)2018Modification and Characterization of Nigerian Clay for improved rheology in water-based drilling fluidUniversity of Illinois, Champaign-Urbana, USAEvent: Presented at the55th Annual Conference of The Clay Mineral Society2016Effect of Achi fortified with Inert Fibre on Rheological and Filtration Properties of Beneficiated Local ClayFaculty of Science, Federal University Oye-EkitiEvent: 2016 International Science Conference2016Production of local activated clay for treatment of waste waterFaculty of Engineering, Ladoke Akintola University of Technology (LAUTECH), OgbomosoEvent: 3rd International Conference on Engineering and Technological Research - Prizes, Grants and Awards
-
Other Awards
Jun 2015The Clay Mineral Society student research grant$500 international award granted as support for PhD research. It's a competitive awardJun 2016The Clay Mineral Society student research grant$1810 international award granted as support for PhD research. It's a competitive awardJun 2017The Clay Mineral Society travel grant$1500 travel grant award to attend the 55th Annual meeting of the society in United State of AmericaSep 2017AGNES mobility grant for junior researchersZAR 30000.00 mobility grant for a two month research visit at the University of Witwatersrand, Johannesburg, South AfricaMar 2018Petroleum Technology Development Trust Fund (PTDF) PhD local Scholarship SchemePTDF PhD scholarship is a scholarship awarded by the Federal Government of Nigeria
